100Mbps/Gigabit Rail Type Two-Layer/Three-Layer Network Managed Industrial Ethernet Switch

• Customization: Available
• Task: Adjust
• Structure: Combination
• Model NO.: JH-4200
• Certification: RoHS, CCC, ISO: 9001, CE
• Condition: New
• Customized: Non-Customized
• System Power Consumption: 500mA/12VDC,6W
• Working Temperature: -40~80ºC
• Working Humidity: 5~95% Rh
• Storage Temperature: -50~100ºC
• Weight: 900g
• Installation Method: Rail Mounted or Wall Mounted
• Transport Package: Box
• Specification: Aluminum alloy, vertical shape
• Trademark: PARAGON
• Origin: China

Product Description

Product Description

Introduction
The JH-4200 series rail type second/third layer network management industrial Ethernet switch supports up to 7 100Mbps optical/electrical ports or 8 Gigabit optical/electrical ports, and can support 2 RS232/422/485 serial communication interfaces, 1 CAN2.0A/B interface, and 1 DO. It is designed specifically for industrial application sites that require network management functions, signal acquisition, and equipment control.
The JH-4200 series supports its own redundant ring network protocol M-Ring, with a super fast self-healing time of less than 20ms, making it easy for users to establish highly reliable ring redundant industrial networks. Equipment support includes static routing, RIP, OSFP dynamic routing protocols; Support multiple management methods including Web, Telnet, Console, and SNMP; Support control functions such as VLAN/GVRP, QoS, IGMP Snooping/Query, LACP, and bandwidth management; And it supports mechanisms such as IP/MAC and port binding, DHCP services, IP access lists, IEEE 802.1X port access control, as well as port mirroring, real-time traffic statistics, MAC address tables, email alarms, system logs, and other diagnostic methods. The various advanced network standards supported by the device facilitate users to optimize network performance, enhance network security, and simplify maintenance procedures. The serial communication interface and CAN bus interface support Modbus communication protocol and CANopen protocol, facilitating on-site signal access and device control.
The JH-4200 series products are made of high-strength industrial aluminum alloy material, with an IP40 protection level, and support DIN rail or wall mounted installation. The device supports dual redundant AC/DC wide voltage input, with built-in power port surge protection and Ethernet port ESD protection. Power or port failures can be alarmed through relay output, and supports industrial wide temperature applications ranging from -40 to 80 ºC, which can well meet the requirements of strict industrial site environments.

Feature
» Supports up to 7 Gigabit ports or 8 Gigabit ports
» 2 user serial ports, RS232//422/485 mode optional
» 1 CAN2.0A/B interface and 1 DO
» Supporting Gigabit Ring Redundancy M-Ring, STP/RSTP/MSTP
» The self-healing time of the ring network is less than 20ms@200 Switch
» Support static routing, RIP, OSFP dynamic routing protocols
» Support VLAN, QoS, IGMP, LACP control
» Support for Web/Telnet/Console/SNMP management
» Support multiple security mechanisms and diagnostic methods
» Support Modbus communication protocol and CANOpen protocol
» Support AC/DC dual redundant power supply wide voltage input
» Support power port surge protection
» Support for Ethernet port ESD protection
» Support DIN rail installation or wall mounted installation
» Support industrial wide temperature applications ranging from -40 to 80 ºC

Detailed Photos

  

Product Parameters

Technical Parameter
Standard	IEEE 802.3 10BaseT
	IEEE 802.3u for 100BaseTX/FX
	IEEE 802.3x is suitable for flow control
	IEEE 802.1D-2004 for STP
	IEEE 802.1w for RSTP
	IEEE 802.1p is applicable to Class of Service
	IEEE 802.1Q is suitable for VLAN tagging
	IEEE 802.3ab 1000BaseTX
	IEEE 802.3z for 1000BaseX
	IEEE 802.3az is applicable to Energy Efficient Ethernet
Processing type	Storage and forwarding exchange method
Transmission distance	100m (based on twisted pair Ethernet)
	110km (based on SFP)
Transmission rate	10/100Mbps adaptive (100Mbps optical/electrical port)
	1000Mbps (Gigabit optical/electrical)
Switch Properties
MAC Table	8KB
Package buffer	1024Kbit
Interface
RJ45 port	10/100BaseTX automatic detection
	MDI/MDI-X adaptive
Fiber optic port	100Base FX (SC/ST interface)
	1000Base SFP slot
Control port	RS-232 (RJ45 connector)
Power demand
Low voltage input	9-60VDC, recommended to use 24VDC
High voltage input	85~265VAC or 100~370VDC
System power consumption	500mA @24VDC,12W
Port protection	Support overload protection
	Support reverse connection protection
LED Indicator Light
System	PWR1,PWR2 ,Fault
Network	ACT/LINK  (located on RJ45 connector)
Serial interface
Number of channels	2
Standard	RS232  (TxD ,RxD ,GND)
	RS485  (Data+ ,Data-,GND)
	RS422  (Tx+,Tx-,Rx+,Rx-,GND)
Baud rate	600bps~230.4Kbps
Communication protocol	Modbus RTU
Serial isolation	4000Vrms photoelectric isolation
Serial port protection	All signal lines are provided with 15KV ESD
Flow control	RS485 automatic data flow control
CAN interface
Number of channels	1
Standard	Bidirectional optical isolation CAN2.0A/B interface
Communication protocol	CANOpen
Signal	CAN- H ,CAN - L
Speed	Maximum 1Mbps Maximum 1Mbps
Isolation protection	2KV digital optoelectronic isolation at 300MHz
Digital output
Number of channels	1
Relay	Optocoupler relay, contactless, capacity 1A@60VAC Or 1A @ 60VDC
Mechanical Characteristics
Shell	Aluminum alloy, vertical shape
Weight	900g
Size	80×105×135 mm
Installation method	Rail mounted or wall mounted
Work Environment
Working temperature	-40~80ºC
Working humidity	5~95% RH
Storage temperature	-50~100ºC
Seismic performance	1G@IEC-68-2-6,sine wave,5~500Hz,1Oct./min,1hr/axis
Impact resistance	5G@IEC-68-2-27 Half sine wave, 30ms
Reliability
MTBF	Over 500000 hours
Warranty period	1 year
Network management
Configuration method	Web browser method
	Telnet remote login
	Console controller console
	SNMP management
VLAN	IEEE802.1Q, GVRP, Port based VLAN
Ring network redundancy	Support for self owned redundant ring network protocol M - Ring
	Supports STP/RSTP/MSTP
	Ultra high speed self-healing time less than 20ms
Routing Protocol	Supports static routing protocols
	Support RIP v1/v2 dynamic routing protocol
	Support OSPF v2 dynamic routing protocol
Network security	IP secure access, port security
	DHCP service, port IP binding
	IEEE802.1X Port Access Control
Flow control	IGMP Snooping/Query Group Level Management
	Speed limitation and broadcast storm suppression
	IEEE 802.1 p QoS priority queue
	IEEE 802.3 x Backpressure Flow Control
Diagnosis	Port mirroring, real-time traffic statistics
	MAC address table, SNTP
	Email alarms and system logs

Ordering Information

Optional models
JH-4200	100Mbps/Gigabit rail type second/third layer network management industrial Ethernet switch, supporting up to 7 100Mbps ports or 8 Gigabit ports, and supporting 2 serial ports, 1 CAN, and 1 DO
Port type
-4BD3QD-2C1N1O	4 100Mbps electrical ports, 3 Gigabit electrical ports, 2 serial ports, 1 CAN and 1 DO
-4BD3QG-2C1N1O	4 100Mbps electrical ports, 3 Gigabit optical ports, 2 serial ports, 1 CAN and 1 DO
-5BD2BG3QG-2C1N1O	5 100Mbps electrical ports, 2 100Mbps optical ports, 3 Gigabit optical ports, 2 serial ports, 1 CAN and 1 DO
-6QD2QG-2C1N1O	6 Gigabit electrical ports, 2 Gigabit optical ports, 2 serial ports, 1 CAN and 1 DO
Power input
-L5	9-60VDC
-HV	85~265VAC or 100~370VDC
Purchasing accessories
Gigabit SFP modules	Refer to SFP module selection table

Company Profile

 

FAQ

1.Q: Who are we?
   A: We are a high-tech enterprise dedicated to the research and development, production, and sales of industrial automation signal acquisition, processing, and communication products. Headquartered in Nanjing, China, our company offers comprehensive pre-sales, after-sales, and technical services globally. Our primary products include remote I/O modules, safety barriers, isolators, safety relays, surge protectors, power transmitters, industrial switches, serial servers among others.

2.Q: Why should you choose us over other suppliers?
   A: Our company is committed to ensuring equipment interface safety at industrial sites. Our products are utilized worldwide across various sectors including electric power generation; petroleum and petrochemical industries; steel manufacturing; cement production; environmental protection; metallurgy; mining operations; aerospace applications; textiles manufacturing; pharmaceuticals distribution; transportation logistics; shipbuilding activities as well as plastics and rubber production processes.

3.Q: How do you ensure quality?
   A: Paragon Technology consistently adheres to the business philosophy of "conducting world-class standards." We strive to provide our customers with high-quality products alongside exceptional service and comprehensive technical support.

4.Q: Do you accept OEM or ODM orders?
   A: Yes. Please share your specific requirements with us.

5.Q: What is your minimum order quantity (MOQ)?
   A: The minimum order quantity is one unit.

6.Q: What is the warranty period for your product?
   A: The warranty period is one year (covering non-human-induced damages).