CH-6224 Series Rack Mounted Industrial Grade Serial Port Device Networking Server

• Certification: RoHS, CCC, ISO: 9001, CE
• Condition: New
• Customized: Non-Customized
• Voltage Input: Supports Global Universal Input Voltage, 85-305VAC
• System Power Consumption: Less Than 8W
• Installation Method: Standard 19 Inch 1u Rack Installation
• Model NO.: CH-6224
• Transport Package: Box
• Specification: SECC metal plate (1mm)
• Trademark: PARAGON
• Origin: China

Product Description

Product Description

Introduction
The CH-6224 series industrial grade serial port device networking server is built based on RISC architecture processors, supporting 2 100/1000Mbps optical/electrical adaptive industrial Ethernet interfaces and 24 RS232/422/485 mode serial interfaces. It is designed specifically for industrial field serial port devices such as field controllers, HMI, PLC, intelligent instruments, sensors, and actuators to connect to Ethernet. Users can achieve data reading or remote control of field serial port devices through the network.
The CH-6224 series industrial grade serial device networking server is embedded with a high-performance embedded microprocessor, running a real-time operating system to ensure the reliability and real-time performance of high-speed data transmission. The complete TCP/IP protocol stack supports seamless integration of industrial Ethernet and serial devices. At the same time, to facilitate the management of multiple network devices, this series of products also supports SNMP, MIB network management functions, and SNTP network clock protocol.
The CH-6224 series adopts a 19 inch 1U standard chassis, rack mounted, and high-strength metal casing to ensure the equipment is sturdy and durable; The device supports AC and DC power input, and the signal interface supports Phoenix terminals, which not only improves system reliability but also facilitates on-site deployment and installation. All serial ports of the equipment are optoelectronic isolated, with built-in power port surge protection and communication port ESD protection. It supports industrial wide temperature applications ranging from -40 to 80 ºC, especially suitable for applications with high requirements for reliability and on-site adaptability.

Feature
» Standard 19 inch 1U rack installation with fanless design
» Supports AC and DC power input
» The signal interface supports Phoenix terminals
» Supports 2 Gigabit Industrial Ethernet optical/electrical ports, cascaded
» Support Socket operation mode, including TCP Server
» TCP Client and UDP
» Supports 24 serial interfaces, optional RS232/422/485
» Support SNMP and MIB network management functions
» Embedded temperature sensor can be used for environmental temperature monitoring
» RTC with built-in backup battery
» All ports are embedded with 15KV ESD protection
» Support industrial wide temperature applications ranging from -40 to 80 ºC

Detailed Photos

  

Product Parameters

Software specifications
Operating system	Linux 3.12
Network protocol	TCP,UDP,IPv4,SNMPv1/v2/v3,ICMP,ARP,HTTP,CHAP,PAP,DHCP,NTP,NFS,SNTP,Telnet,FTP,TFTP,PPP, PPPoE
Network security	Iptables firewall
Network management	SNMP MIB- II
Configuration method	Web Console ,Serial Consle ,Telnet Console ,Windows Utility
Hardware specifications
Ethernet interface
Number of channels	2
Electric port	10/100Mbps adaptive, RJ45
Optical aperture	100/1000Base SFP
Isolation protection	15KV air discharge and 8KV contact discharge protection
Serial interface
Number of channels	24
Standard	RS232  (TxD ,RxD ,GND)
	RS422  (Tx+,Tx-,Rx+,Rx-,GND)
	RS485  (Data+,Data-,GND)
Serial port protection	15KV ESD, 2KV surge protection
Flow control	RS485 automatic data flow control
Serial port parameters
Data bits	5,6,7,8
Stop bits	1,1.5,2
Check bits	None ,Even ,Odd ,Space ,Mark
Baud rate	110bps~230.4Kbps
Power demand
Voltage input	Supports global universal input voltage, 85-305VAC, 100-430VDC
System power consumption	Less than 8W
Mechanical Characteristics
Shell	SECC metal plate (1mm)
Weight	6kg
Size	440×300×45 mm
Installation method	Standard 19 inch 1U rack installation
Button
Function	Supports "resetting to factory default settings"
LED Indicator Light
System	Power,Status
Serial port	TXD/RXD
Network	ACT/LINK  (located on RJ45 connector)
Work Environment
Working temperature	-40~80ºC
Working humidity	5~95% RH
Storage temperature	-50~100ºC
Seismic performance	1G@IEC-68-2-6,sine wave,5~500Hz,1Oct./min,1hr/axis
Impact resistance	5G@IEC-68-2-27 Half sine wave, 30ms
Reliability
Alarm tool	Built-in buzzer and RTC
Temperature monitoring	Built in temperature sensor, can be used for temperature monitoring
Watchdog	Hardware Watchdog (WDT) monitoring
MTBF	Over 500000 hours
Warranty period	1 year

Ordering Information

Optional models
CH-6224-2QG/2QD	Rack mounted industrial grade serial port device networking server, 2 Gigabit optical/electrical ports, 24 RS232/422/485 serial ports
-N	8 RS232/422/485 software options, 16 RS485
-F	24 RS485
-T	24 RS232

Company Profile