| Customization: | Available |
|---|---|
| Certification: | RoHS, CCC, ISO: 9001, CE |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Basic parameters | |
| Number of protective lines | 3-wire |
| Rated working powerUn(DC) | 12V |
| Maximum working voltageUc(DC) | 18V |
| Rated working currentIL(DC) | 800mA |
| Nominal discharge current In(8/20us) | 10KA |
| Maximum discharge current Imax(8/20us) | 20KA |
| Impulse current Iinp(10/350us) | 2.5KA |
| Total impulse current Iinp(10/350us) | 5KA |
| Voltage protection level UP(8/20us) Line to line, line to ground |
40V/600V |
| Voltage protection level UP(8/20us) Line to line, line to ground | 20V/600V |
| Bandwidth(-0.5dB) | 10MHz |
| Response timetA | 1ns |
| Path resistance(Each line) | 1Ω |
| Leakage current | <10uA |
| Suit | Suitable for signal input of thermal resistors, thermocouples, etc |
| Size | |
| Depth | 78.2mm |
| Height | 90mm |
| Width | 12.7mm |
| Housing | |
| Material | ABS flame retardant |
| Protection grade | IP20 |
| Flame retardant grade | PA66/V0 |
| Colour | Blue |
| Standards/Procedures | |
| Testing standards meet | GB/T 18802.21-2016/IEC 61643-21-2012 |
| Lightning protection performance test | Beijing Lightning Protection Facilities Testing Service Center |
| Usage environment | |
| Continuous operating temperature | -20ºC~+60ºC |
| Storage temperature | -40ºC~+80ºC |
| Relative humidity | 10%~90% |
| Environmental requirements | There should be no strong vibrations, impacts, high currents, sparks or other electromagnetic induction effects in the surrounding environment. The air should not contain media that corrode chromium, nickel, and silver coatings, and should not contain flammable or explosive substances |
| Connection parameters | |
| Available cross-sectional range of wires | 0.5~2.5mm² |
| Minimum conductor cross-section AWG | 12 |
| Maximum conductor cross-section AWG | 24 |
| Strip length | 8mm |
| Thread | M3 |
| Connection method | Screw connection |
| Minimum tightening torque | 0.5 Nm |
| Maximum tightening torque | 0.6 Nm |
| Install | |
| Installation method | DIN35mm guide rail installation |
){kind=link}