| Certification: | RoHS, CCC, ISO: 9001, CE |
|---|---|
| Condition: | New |
| Customized: | Non-Customized |
| Supply Voltage: | 24V DC |
| Input Signal: | Do Signal |
| Number of Contacts: | 1no |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
| General | |
| Number of channels | 1 |
| Electromagnetic compatibility | EN60947,EN61000-6-2,EN61000-6-4 |
| Status display | 1 green LED |
| Start button monitoring | Manual start/automatic start |
| Rated insulation voltage | 250V (pollution level 2 according to IEC60947-5-1) |
| Rated impulse withstand voltage | 6000V (overvoltage category 2 according to IEC60947-5-1) |
| Dielectric Strength | 1500V AC,1min |
| Time | |
| Absorption buffer time | ≤30ms |
| Release buffer time | ≤30ms |
| Recovery time | ≤30ms |
| Short interruption of power supply | 20ms |
| Contact resistance | ≤100mΩ |
| Applicable | DO signal (SIS system) |
| Input data | |
| Number of channels | 1 |
| Input signal | DO signal |
| Input current | ≤35mA(24VDC) |
| Wire resistance | ≤15Ω |
| Input device | SIS system DO signal matching |
| Output data | |
| Number of contacts | 1NO |
| Output signal | Relay output |
| Contact material | AgSnO |
| Contact fuse protection | 5A(Internal) |
| Contact capacity | 5A/250V;5A/24V |
| Power supply | |
| Supply voltage | 16V~35VDC |
| Current loss | ≤35mA(24VDC) |
| Voltage tolerance | 0.85~1.1 |
| Power protection | Reverse protection of power supply |
| Power supply mode | Independent power supply |
| Power connecting mode | Terminal power supply |
| Overall dimension | |
| Height | 114.5mm |
| Width | 99mm |
| Thickness | 12.5mm |
| Housing | |
| Material | ABSflame retardant |
| Degree of protection | IP20 |
| Flammability rating | UL94/V0 |
| Colour | Grey+Yellow |
| EMC data | |
| Electrical fast transient/burst immunity | Compliant with:IEC 61326-1;A-leve |
| Surge immunity | Compliant with:IEC 61326-1;B-leve |
| Radiated,radio-frequency,electromagnetic field immunity | Compliant with:IEC 61326-1;conform to basic requirements |
| Electrostatic discharge immunity | Compliant with:IEC 61326-1;A-leve |
| Immunity to conducted disturbances, induced by radio-frequency fields | Compliant with:IEC 61326-1;conform to basic requirements |
| Low frequency common mode conduction | Compliant with:IEC 61326-1;conform to basic requirements |
| Compliant with standards | BS EN 62061:2015,ISO 13849-1:2015,ISO 13849-2:2012, IEC EN 60204-1, ISO 13849-1 |
| Safety Integrity Level (SIL) | EN954-1, maximum safety control level 4 |
| Performance level (PL) | ISO 13849-1:2015,PLe |
| Operating conditions | |
| Continuous operating temperature | -20ºC~+60ºC |
| Storage temperature | -40ºC~+85ºC |
| Relative humidity | <90% RH (no condensate) |
| Environmental requirements | There should be no strong vibrations, impacts, high currents, sparks or other electromagnetic induction effects in the surrounding environment. The air should not contain media that corrode chromium, nickel, and silver coatings, and should not contain flammable or explosive substances |
| Connection data | |
| Conductor cross section solid range | 0.5~2.5mm² |
| Conductor cross section AWG min. | 12 |
| Conductor cross section AWG max. | 24 |
| Stripping length | 8mm |
| Screw thread | M3 |
| Connection method | Screw connection |
| Tightening torque min. | 0.5 Nm |
| Tightening torque max. | 0.6 Nm |
| Installation | |
| Installation method | DIN35mm |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}