| Customization: | Available |
|---|---|
| Certification: | RoHS, CCC, ISO: 9001, CE |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Basic parameters | |
| Lightning protection category | T2/T3 |
| rated operational voltage Un(AC) | 220V/380V |
| Maximum Continuous Operating Voltage Uc(AC) | 320V/255V |
| Nominal discharge current IN(8/20us) | 20KA |
| Maximum discharge current Imax(8/20us) | 40KA |
| Voltage protection level UP | ≤1.6KV |
| Front fuse or circuit breaker | 40A |
| Response time tA | 25ns/100ns |
| Remote communication interface | 250VAC/0.5A |
| Suit | Suitable for installation in lightning protection areas LPZ2, LPZ3 |
| Size | |
| Depth | 90mm |
| Height | 58mm |
| Width | 18mm |
| Housing | |
| Material | PBT flame retardant |
| Protection grade | IP20 |
| Flame retardant grade | PA66/V0 |
| Colour | Red |
| Standards/Procedures | |
| Testing standards meet | GB/T 18802.21-2016/IEC 61643-21-2012 |
| Lightning protection performance test | Beijing Lightning Protection Facilities Testing Service Center |
| Usage environment | |
| Continuous operating temperature | -20ºC~+60ºC |
| Storage temperature | -40ºC~+80ºC |
| Relative humidity | 10%~90% |
| Environmental requirements | There should be no strong vibrations, impacts, high currents, sparks or other electromagnetic induction effects in the surrounding environment. The air should not contain media that corrode chromium, nickel, and silver coatings, and should not contain flammable or explosive substances |
| Connection parameters | |
| Available cross-sectional range of wires | 1.5~10mm² |
| Minimum conductor cross-section AWG | 12 |
| Maximum conductor cross-section AWG | 24 |
| Strip length | 8mm |
| Thread | M3 |
| Connection method | Screw connection |
| Minimum tightening torque | 0.5 Nm |
| Maximum tightening torque | 0.6 Nm |
| Install | |
| Installation method | DIN35mm guide rail installation |
){kind=link}